LED Dimmer Switch - Universal -1-10V

The 1-10V led regulation system is a simple light regulator system that allows a simple regulation between 1% and 100% of the luminous flux of a luminaire.

For this system it is necessary to install an extra cable with two cables (-bus- control of the luminaire). Through this cable we will send a continuous voltage with a value between 1V and 10V, this signal will be in charge of managing the amount of light delivered by the luminaire, the value of 1V being the minimum and the value of 10V the maximum.

It is important to keep in mind that in the control bus we will also have a voltage drop, as if any normal electrical circuit were involved, so the section used must be the correct one for proper operation.

DATA SHEET
REFERENCE:1273	IP :IP20	Rated Power :LED Max.200W - Halogen Max 2000W	Nominal Voltage:110V -240V	Dimensions (mm):80mm x 85mm x 60 mm	Frequency (Hz):50/60Hz	Construction Material:Flame retardant thermoplastic	Warranty Years:3	Certifications:CE - ROHS	Dimmable1-10V