Motion Detector - High Bay - UFO DIAMOND
Installation is very simple thanks to the connection pins that fit perfectly into the base of the LED DIAMOND Bell. Once the pins have been inserted, it is only necessary to turn it a little so that it is completely installed.
The motion detector works with the remote control which is sold separately.
Our motion sensor that dims the lighting from high to low depending on movement.
This sensor is designed to be installed inside the lower body of a light fixture, UFO High Bay.
The sensors use microwave detection technology that reacts to changes in motion within the coverage area.
Once the sensor stops detecting motion and the time delay elapses, the lights will switch from high mode to low mode and eventually to the OFF position if desired.
Sensors must directly "see" the motion of a moving person or object to detect them, so special attention must be paid to the sensor's luminaire location and lens selection.
Avoid placing the sensor where obstructions may block the sensor's line of sight.
DATA SHEET | ||||||||||||
REFERENCE:960004 | IP :IP65-Outdoor | Nominal Voltage:12V 0.03A | Dimensions (mm):Ø60H30mm | Construction Material:Thermoplastic | Energy Rating:A+ | Other Information:MICROWAVE 5.8GHz | Beam Angle (º):150º | Warranty Years:5 | Certifications:CE - ROHS | Accessories and ComplementsMando a Distancia | DimmableYES | Range (m):12m |